CBJ95 Cry Baby Junior Wah Wah

OPERATION
1. Run a shielded instrument cable from your guitar to the CBJ95s INSTRUMENT jack.
2. Run another shielded instrument cable from the CBJ95s AMPLIFIER jack into your amplifier input.
3. Turn on the amplifier and begin playing.
4. To turn the pedal on/off, push the top of the pedal down until you hear a Click.
5. Located under the rocker at the heel of the pedal is an  adjustable torque clutch that allows the amount of resistance the rocker has to being moved. Turn clockwise to increase resistance or counterclockwise to decrease resistance (wrench included). See TORQUE ADJUSTMENT diagram.
6. The VOICING switch allows you to change the frequency range of the CBJ95. Default setting is H—High, for the standard GCB95 sound. For a more vintage, midrange-focused sound, set the switch to M. For a lower frequency range, select L. See VOICING SWITCH diagram.
7. By rocking your foot back and forth on the mini pedal, you can instantaneously change the effect that the Cry Baby Wah has on the tone of your instrument.

Voicing
H 380 Hz to 2100 Hz
M 330 Hz to 1800 Hz
L 270 Hz to 1500 Hz

SPECIFICATIONS
IMPEDANCE:
Input Impedance 800 kOhm
Output Impedance <10 kOhm

WAH RANGE SELECTOR
Range Selector Switch Position (H towards Heel, L towards Toe)
H 380 Hz to 2100 Hz
M 330 Hz to 1800 Hz
L 270 Hz to 1500 Hz

MAXIMUM LEVEL
Input -8.0 dBV
Output +10 dBV

MAXIMUM GAIN
Heel Down +19.5 dB
Toe Down +19.0 dB

NOISE FLOOR
Heel Down -98 dBV
Toe Down -89 dBV

Bypass True Hardwire
Current Draw 3 mA
Power Supply 9 volts DC